Avant Moto Design
Titanium Mirror Blanking Bolts M8 (1.5mm) x 10mm
Titanium Mirror Blanking Bolts M8 (1.5mm) x 10mm
In stock
Free UK delivery on orders over £25
Couldn't load pickup availability
Description
A matched pair of PVD black Grade 5 titanium (Ti-6Al-4V) blanking bolts to cap off your mirror mounts once the mirrors come off — ideal for track days or a stripped-back street look. Supplied as one left-hand and one right-hand thread in M8 x 1.5, so both sides are covered, with a stealth black finish that stays clean and corrosion-resistant.
Pack of two (left hand and right hand thread)
Specification
| Material | Titanium Gr5 (Ti-6Al-4V) |
|---|---|
| Tensile strength | 900-1050mpa |
| Finish | PVD black finish |
| Head diameter | 15.75mm |
| Head depth | 5mm |
| Torx size | T25 |
| Thread diameter | M8 |
| Thread pitch | 1.5mm |
| Length | 10mm |
- Precision-finished with rolled threads
Fitment and safety
Check the thread pitch, length and diameter match your original bolt before fitting. Not sure? Read our FAQ.
Delivery and returns
Orders are dispatched within 1–2 working days. UK delivery is free on orders over £25.
Returns: 30 days from delivery. Items must be unused and in their original packaging. Email info@avantmotodesign.com before sending anything back.
Care
Torque: use a calibrated torque wrench and the manufacturer specification.
Anti-seize: titanium can gall if fitted dry. Apply a thin layer of copper-based anti-seize to the threads when fitting into aluminium or steel.
Left and right hand threads: these are supplied as a pair with opposite threads. Check which side each one fits before tightening.
Cleaning: clean the coloured PVD finish with mild soapy water and a soft cloth. Avoid abrasive pads, metal polish and harsh solvents, which can wear the coating.
Share
