Avant Moto Design
Titanium Front Brake Caliper Bolt Race Spec Drilled M10 (1.25mm) x 65mm Polished
Titanium Front Brake Caliper Bolt Race Spec Drilled M10 (1.25mm) x 65mm Polished
In stock
Free UK delivery on orders over £25
Couldn't load pickup availability
Description
Race specification titanium front brake caliper bolt, sold individually. Made from Grade 5 titanium (Ti-6Al-4V) with a tensile strength of 900–1050 MPa. Cross-drilled bolt heads on every flat for safety wire compatibility.
Specification
| Size | M10 x 65mm (1.25mm pitch) |
|---|---|
| Material | Grade 5 Titanium (Ti-6Al-4V) |
| Weight | 25g |
| Finish | Polished |
| Thread diameter | M10 |
| Thread pitch | 1.25mm |
| Length | 65mm |
- Precision-finished with rolled threads
Fitment and safety
Check the thread pitch, length and diameter match your original bolt before fitting. Not sure? Read our FAQ.
Delivery and returns
Orders are dispatched within 1–2 working days. UK delivery is free on orders over £25.
Returns: 30 days from delivery. Items must be unused and in their original packaging. Email info@avantmotodesign.com before sending anything back.
Care
Torque: use a calibrated torque wrench and the manufacturer specification.
Anti-seize: titanium can gall if fitted dry. Apply a thin layer of copper-based anti-seize to the threads only, and keep it off the brake disc, pads and caliper faces.
After the first ride: re-check the torque, and check again at every service. Brakes are safety critical, so if you are in any doubt have a qualified technician fit and check them.
Cleaning: wipe with a soft cloth and mild soapy water. A non-abrasive metal polish will bring back the shine.
Share
